DISPLACEMENT SENSORS WITH STANDARD OUTPUTS

			Model Type
Model Range			LDS-xx				LDS
			05	10	25	50	100
Feature		Units
Displacement		mm	5.5	11	26	51	101
		inch	0.2	0.4	1.0	2.0	4.0
Weight (excluding cable)		grams	125 / 135	130 / 140	140 / 150	180 / 200	320
Spindle Force		gf	150-400	50-300	50-300	50-250	120-400
Sensitivity (nominal)		mV/mm	4.2 / 4.6	2.5 / 2.8	1.3 / 1.5	0.9 / 0.96	0.38
Output FS (nominal)		mV/V	4.2 / 4.6	5.1 / 5.6	6.7 / 7.2	9.0 / 9.6	7.5
Non-Linearity, Hysteresis, Repeatability  (total error)		%FS	<0.1				<0.2
Dim A		mm	110	115	146	230	390
Dim B		mm	78.5	78.5	94	155	264
Dim C		mm	Ø17.4				Ø25.4
Bridge Resistance		Ohms	350
Excitation  AC or DC		volts	2-10
Current consumption		mA	<30 @ 10vdc
Insulation Resistance		MΩ	>2000
Resolution			Infinite
Operating Temperature		°C	-10 to +70
Temperature Effect	Zero		<0.01% / °C
	Output		<0.01% / °C
Environmental Protection			IP 54
Standard Termination*			2mtrs 4 core screened cable (min bend radium 10mm)
Electrical Connections				Input +	Input -	Output +	Output -
*other options available				Red	Blue	Green	Yellow
With Plug Fitted		5 pin Din 240°		Pin 1	Pin 2	Pin 4	Pin 5

PHYSICAL DIMENSIONS
(Refer to table above for measurements)

 

WIRING SCHEMATIC FOR STANDARD mV/V OUTPUT SENSORS

NB. As a result of continuous development, the specification of our linear displacement sensors may be subject to alteration.